Ghost 2 Immobiliser Installation
The installation of the ghost 2 immobiliser is a straightforward and effective way to protect your car from theft. It connects directly to your vehicle's CAN data networks and is almost inaccessible.
First, you must identify an uninterrupted power source and an earthing point. These wires must be properly shielded to prevent electrical shorts.
In preventing theft
The Ghost 2 Immobiliser utilizes a unique PIN code sequence that's created using the electronic buttons on your steering wheel or centre console to ensure that only you are able to start your vehicle. Even if thieves were able to copy your keys or hack your car's system it will not be able to begin the car. It's also completely quiet and inaccessible to anyone who attempts to test it, so you can rest sure that no one will know that you've added an additional layer of security.
It also assists in preventing theft since it can disable the engine of your car even if a burglar manages to gain entry. This is accomplished through the use of another device, the Shadow that connects to your car's CAN data system and doesn't communicate via radio frequency, which makes it difficult for thieves to find or tamper with. The Shadow can also be connected to the vehicle's tracking/paging system allowing you to monitor its movements. It also has an output that can be used to sound a siren when someone tries to take it.
It is crucial to work in a well-lit space when working with wiring to make it easier to identify the right wires and to avoid accidental disconnections or short circuits. Checking the connections twice and testing them is essential, as well as insulation of the wiring to shield it from the elements. Cable tie is a great way to bundle and secure wires. This improves their appearance, and reduce the chance of them getting lost when the vehicle is in operation.
It is also a great idea to mark the CAN L and H wires with tape or labels. A misidentification of their position could trigger a surge of power that damages the immobiliser. It is also recommended to test the identified power source and grounding point using a multimeter to ensure that they have a constant 12V supply and a solid grounding.
Easy to use
A ghost immobiliser is a great way to protect your vehicle from theft. It stops key cloning, ECU swapping and other security threats, and can be linked with an iPhone app for easy monitoring and management. The app also sends alerts if your car is compromised. The app can also assist you to locate your vehicle in the event that it is stolen.
The Ghost immobiliser can be operated without any special equipment. It is linked to the CAN system in your vehicle and is programmed using a unique PIN. It's activated using a set of buttons on your dashboard or steering wheel, or through the WeCar mobile app. The code has to be entered to start the engine, so thieves aren't able to turn off your vehicle and take off.
Installing an immobiliser Ghost is a straightforward process. It's important to follow the steps to ensure that the systems of your vehicle are integrated smoothly. The first step is to disconnect the battery. This will prevent airbag deployment and ensure safety. It is also essential to work in a place that is well-lit so that you can avoid a sloppy and inaccurate connections. It's also important to use the correct soldering techniques and high-quality connectors to ensure a secure and reliable connection.
The CAN H wire and the CAN L wire are required to connect your Ghost immobiliser with the wiring in your vehicle. With a wiring diagram for your vehicle determine these wires and find a suitable place to connect them. Mark these wires using tape or labels to make them easier to identify during installation.
Once connections have been established, it's a good idea to test the immobiliser to be sure that it is working properly. You should also test the Transport Mode which disables the Ghost System and allows you to temporarily disable your security functions. This is particularly useful for scenarios such as servicing or transportation of vehicles. This feature is particularly useful if your vehicle is older and requires the battery to be isolated during service.
Low-profile
A ghost immobiliser is an ideal solution to prevent theft from keyless entry vehicles and vans. It works by capturing the signal from your vehicle's original remote and creating an obstruction that thieves can't penetrate without a valid PIN code. It's a secure and discreet method of protecting your vehicle and is even recommended by insurance companies to cut down on the cost of your monthly premiums. It is a low-profile, hidden system that is located within the buttons of your car. It does not have LED indicators and is therefore virtually undetectable by thieves.
Contrary to other security systems that are available, unlike most security systems, the Ghost immobiliser is linked to your vehicle's CAN data network instead of a key fob. It is secure and thieves can't disable it by cutting the wires. This makes it harder for thieves to steal your vehicle. It's also an excellent alternative for older vehicles that do not have a keyless entry system.
The installation of a ghost immobiliser could be completed by an expert, or you can do it yourself with the right tools and materials. You'll require basic hand tools as well as a multimeter for checking electrical values, and insulation tape or cable ties to ensure your connections are secure and well-insulated. It is also important to remove your battery prior to starting it, and ensure that all wiring is properly bundled and insulated to prevent tampering from thieves.
If you're uncomfortable installing your own immobiliser, you can find an auto repair shop in your area to complete the task for you. They'll handle the entire procedure, from the initial inspection to the installation. If anything goes wrong, they will provide a warranty. They can answer any questions about the immobiliser, and also help you decide if it's the best option for your vehicle.
The Autowatch Ghost 2 smart immobiliser is integrated directly into your car's electronic control unit. This can help protect you from hacking, key cloning and relay attacks that are common in modern vehicles. It's TASSA verified and offers superior security against theft, so you can rest sure that your vehicle is secure when you drive it.
TASSA verified
The Ghost immobiliser is one of the most effective ways to guard your car from theft. It connects to the CAN data network in your car and uses it to prevent your engine from starting without your personal PIN code. ghost immobiliser cost cannot be spotted by thieves and is a great alternative to car alarms. You can change your PIN at anytime and only you will know. This will ensure the security of your vehicle.
Installers TASSA certified will install the Ghost system at your office or in your home within a few short hours. They will also give you owners' guides, installation certificates and a complimentary emergency card. They will also give you an extensive demonstration of the device, and ensure that you are satisfied with the service before they leave.
The Ghost, unlike other immobilisers is able connect directly to the CAN data network of your vehicle. This allows it to be installed without cutting wires. It is also silent and is therefore difficult for thieves to identify. The system is equipped with a unique and changeable PIN code, which you enter by pressing buttons on the dashboard or steering wheel. This stops anyone else from starting your car, even if they possess the key fobs.
Connect the battery prior to installing the ghost 2 immobiliser. This will prevent any accidental airbag deployment or short circuits during the process. When the battery is removed, you should follow the instructions in the user manual to connect the immobiliser. Use online resources to find additional information specific to your model.
It is recommended to test the immobiliser after completing it to ensure it is working properly. Enter the PIN code into the vehicle and attempt to start it. Then, you must conduct regular checks on the immobiliser in order to ensure it's functioning properly. This will help you identify any problems early and fix them swiftly.